My Order Summary

Tel. +44 (0) 28 9446 5151

GB (£)

Worldwide delivery to your door

Basket (0)

View Basket & Checkout

Search for

Alloy Wheels Search

Technical Search

Enter your vehicle details

Load Rated
Aggressive Fitments

To Find the Latest Alloy Wheels or Alloy Wheels and Tyres, please Enter your Vehicle details above. Our Alloy Wheel Finder™ will search The UK & Irelands Number 1 Website For Alloy Wheels & Tyres ™ to display all available wheels & tyres for your Vehicle. If you require any help of advice please call.

Car not Listed? Click here to add it to the system.

Alloy Wheel Technical Search ™

Diameter ?
This is the diameter of the wheel, which is measured in inches from the tyre mounting surface on one edge to the opposite edge on the alloy wheel, for example 18”x8” with 18” being the wheel diameter.
x

Width ?
This is the width of the alloy wheel which is the maximum width across the tyre mounting surface on the wheel, measured in inches for example; 18”x8” with 8” being the wheel width.
Holes ?
The number of holes the wheel has to bolt it to the vehicle hub. Racing nut applications are listed under 15x130 under PCD.
x

PCD ?
This is the Pitch Circle Diameter, which is the diameter of a line drawn through the centre of the bolt holes and is measure in millimetres (mm). Normally this is displayed in this format 5x112 with 112mm being the PCD and 5 being the number or holes. Racing nut applications are listed under 15x130
Load Rating (kgs) ?
This is the value in kgs which the alloy wheel has been load rated to carry. The same wheel design can have different load ratings depending on the size and PCD of the wheel among other factors.
Offset Min

Offset Max ?
The offset is the distance between the wheel centre line and the mounting face of the wheel. Measured in millimetres (mm) and normally displayed as “ET45” on a wheel (ET45 being an example of an alloy wheel with a 45mm offset), the lower the number the further out the wheel will sit when bolted to the vehicle. Every vehicle has a permissible offset range which is dependent on a number of factors.
Weight Min

Weight Max ?
This is the approximate weight of the wheel in Kgs; please note every care is taken to ensure this value is accurate to +/-5% but errors can occur in our data.

Optional Staggered Setup Search

Reset Options

Diameter ?
This is the diameter of the wheel, which is measured in inches from the tyre mounting surface on one edge to the opposite edge on the alloy wheel, for example 18”x8” with 18” being the wheel diameter.
x

Width ?
This is the width of the alloy wheel which is the maximum width across the tyre mounting surface on the wheel, measured in inches for example; 18”x8” with 8” being the wheel width.
Holes ?
The number of holes the wheel has to bolt it to the vehicle hub. Racing nut applications are listed under 15x130 under PCD.
x

PCD ?
This is the Pitch Circle Diameter, which is the diameter of a line drawn through the centre of the bolt holes and is measure in millimetres (mm). Normally this is displayed in this format 5x112 with 112mm being the PCD and 5 being the number or holes. Racing nut applications are listed under 15x130
Load Rating (kgs) ?
This is the value in kgs which the alloy wheel has been load rated to carry. The same wheel design can have different load ratings depending on the size and PCD of the wheel among other factors.
Offset Min

Offset Max ?
The offset is the distance between the wheel centre line and the mounting face of the wheel. Measured in millimetres (mm) and normally displayed as “ET45” on a wheel (ET45 being an example of an alloy wheel with a 45mm offset), the lower the number the further out the wheel will sit when bolted to the vehicle. Every vehicle has a permissible offset range which is dependent on a number of factors.
Weight Min

Weight Max ?
This is the approximate weight of the wheel in Kgs; please note every care is taken to ensure this value is accurate to +/-5% but errors can occur in our data.

Additional Options

Manufacturer
Model
EH+ Runflat ?
This refers to the alloy wheel Bead Seat Contour, in short a slight raised hump on the alloy wheel tyre mounting face to help ensure a Runflat tyre, when driven with no air does not come off the wheel easily.
Colour

Enter your tyre size

show only winter tyres
show only Runflat tyres
show only Summer tyres

New Wheel Search »

Contact Performance Alloys

Performance Alloys Enquiry Form

Name :

Country :

E-Mail :

Telephone :

Car Make :

Car Model :

Car Year of Manufacture :

Subject :

Message :

Address
Toshe Trading Ltd
10 Antrim Business Park
Randalstown Road
Antrim, Co. Antrim
Northern Ireland
U.K.
BT41 4LD
Telephone:

UK Tel: 028 9446 5151

Rep of Ireland Tel: 048 9446 5151

Global Tel: +44 (0)28 9446 5151

E-mail:

sales@performancealloys.com